Skip to main content

WeatherXM D1 bundle (WB1200) Introduction

You're now the proud owner of a WeatherXM Station. Welcome to the People's Weather Network!

Next steps

You just got your station, or, you will soon! Let's see what are the necessary steps in order to properly assemble, install, claim and enable it to send data in order to receive $WXM reward tokens.

Check the box contents

Make sure that everything is in order and you're all set to proceed with station assembly.

View Contents

Assemble your weather station

Assemble all parts and make sure all sensors work as expected. For this step, you will need 2 AA batteries that are not included in the box.

View Station Assembly Instructions

Install your weather station

This is one of the most important steps, as proper installation is key in order to collect valid weather data. For this step, you will need a pole that is at least 2m/6.5ft and a way to secure it in place (both not included in the box). Here you will also see the best practices on how to properly install the station according to WMO.

View Station Installation Instructions

Connect and claim station

Once you've finished with installation, you can connect your station to your WG1200 Gateway and claim them as your own in WeatherXM network. To do this, you will need to download our WeatherXM app (Android and iOS).

View Connect and Claim Instructions

Add your ERC20 compatible wallet

In order to receive WXM rewards, you will need to connect an ERC20 compatible wallet which supports Arbitrum Sepolia Testnet. We have prepared a guide to do so using MetaMask (although it is not mandatory to use this).

View Wallet Addition Instructions